Bondtech LGX™ FF Print Head
€194,90 με ΦΠΑ
The LGX™ FF Print Head is a special unit that includes the LGX™ Large Gears eXtruder and the LGX™ FF short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.
Master All Materials * Excel With Flexibles
- This LGX™ Print Head only supports 1.75 mm size filament.
Description
Designed To Be Flexible
The LGX™ For Flexibles Set includes a reversible heat sink that can be installed on the left or right hand side of the cold block. The heat sink also includes the hole pattern for attaching 40×40 fans.
Main Advantages
- Gives access to all available materials.
- Enables to print flexible and soft materials faster.
- It is small and light.
- Allows mounting in many different ways.
Additional information
Weight | 0,3 kg |
---|---|
Κατασκευαστής |
Technical Specification
LGX™ EXTRUDER
- e-steps value : 400 on 16 bit micro-stepping setups; 800 on 32 bit micro-stepping setups.
- Drive wheels : hardened steel;
- Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft.
- Mounting holes : M3
- Mounting patterns : bottom anterior (2 points); left (2 points), right (2 points), front (4 points), back (4 points)
- Holes on the sides of the LGX™ : 5 mm depth
- Holes on the bottom of the LGX™ : 12 mm depth
- retraction speed : 35 mm/s
- retraction distance (bowden) : ~5 mm (0.4 + tube length x 0.15)
- retraction distance (direct drive) for rigid materials : 0.4 mm
- retraction distance (direct drive) for soft materials : 3 mm
- Max environment operating temperature : 70°C
- LGX™ DD net weight : 218.6 g
- LGX™ B net weight : 224 g
- Package measurements : 80x103x73 mm
- Package weight : 269 g
- Download the LGX Technical Drawings here.
LDO Stepper Motor for Bondtech LGX™
- PH-06AWJ connector
- 2 phases
- DC 5.5 V
- Max 1.0A/phase
- To use the LGX and run the stepper motor with currents between ~0.7 and ~0.9A:
- set Vref between 0.70 and 0.90 using TMC stepper drivers;
- set Vref between 0.28 and 0.36 for stock Pololu A4998 stepper drivers;
- set Vref between 0.56 and 0.72 for Pololu A4998 stepper drivers on Creality.
- Class B motor, rated up to 130°C
- Max recommended environment : 70°C
- Max temperature at this environment temperature can go up to 130°C on account of the self heating.
- Download the stepper motor Technical Data Sheet here.
LGX™ FF Set
- Cold Block Material : Anodized Aluminum;
- Heat Sink Material : Anodized Aluminum;
- Copperhead Hot Block materials : steel tube; copper body; nickel plating.
- Max operating temperature : 450°C
- LGX™ FF Set net weight : 55.5 g g
- Package measurements : 80x103x73 mm
- Package weight : 96 g