DM556 Stepper Driver

39.50 με ΦΠΑ

2 phase Digital Stepper motor driver

Add to Wishlist
Add to Wishlist


DM556  is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with other analog or TB6600H chips driver, it can drive a stepper motor at much lower noise, lower heating, and smoother movement. 


Product features:

Anti-Resonance provides optimal torque and nulls mid-range instability
Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
15 selectable microstep resolutions from 400 to 25600
Soft-start with no “jump” when powered on
Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
Automatic idle-current reduction
Suitable for 2-phase and 4-phase motors
Support PUL/DIR mode
Over-voltage and over-current protections


Electrical Specifications:

Output Peak Current: 1.8~5.6A (4.0 RMS)
Input Voltage: +20~50VDC (Typical 24-48VDC)
Logic Signal Current: 7~16mA (Typical 10mA)
Pulse Input Frequency: 0~200kHz
Pulse Width: 2.5μS
Isolation Resistance: 500MΩ

Cooling: Natural Cooling or Forced cooling
Environment: Avoid dust, oil fog and corrosive gases
Operating Temperature: -10℃~45℃ 
Vibration: 10-55Hz / 0.15mm




Additional information

Weight0.600000 kg
Dimensions0.000000 × 0.000000 × 0.000000 cm