EasyPrint PLA Sample – 2.85mm – 50 g – Rainbow
€4,90 με ΦΠΑ
This is why you should use EasyPrint!
- 50 grams of EasyPrint PLA
- Very easy to print with wide temperature span of 185° – 220° C
- Perfect roundness
- Perfect diameter tolerance within +/-0.02mm
- Made from 100% virgin PLA material
With EasyPrint filament your success rate will be much higher!
Out of stock
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
The rainbow filament spool consists of six colors. The order of color is randomized and will vary from spool to spool. Each color represents about 35 meter of filament followed by a transition to the next color.
To get maximum effect you should print a fairly large object and / or use a lot of infill.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
|Tolerance||± 0.02 mm|
|Heated build platform required||No|
|Print Temperature||185 – 220° C|
|Melting Point||GB/T19466.3-2004||175 – 179° C|
|Glass transition temperature||GB/T19466.3-2004||60 – 62° C|
|Tensile strenght @ Yield||GB/T1040-1992||63 MPa|
|Elongation @ Break||GB/T1040-1992||6 %|
|Flexural Strenght||GB/T1040-1992||92 MPa|
|Izod Impact Strenght||GB/T1040-1992||3,5 KJ/m2|