PrimaSelect NylonPower PA 6/66 – 2.85mm – 500g – Black

49,90 με ΦΠΑ

3D print resilient parts. Prima SELECT NylonPower PA 6/66 is a special co-polymer blend that takes full advantage of the strengths of both PA6 and PA66. The combination of these two types of PA makes our NylonPower very easy to 3D print.

Main material properties of NylonPower PA6/66:

  • Perfect blend of PA6 and PA66
  • High chemical and thermal resistance
  • Less warping than regular Nylon/PA
  • Excellent layer adhesion creates strong prints
Προσθήκη στα Αγαπημένα
Προσθήκη στα Αγαπημένα
Estimated delivery between 4-10 days 2022/12/10

Description

Prima SELECT NylonPower PA 6/66 – Buy PA6/66 3D printer filament

NylonPower PA 6/66 by PrimaCreator is a special co-polymer blend 3D printer Polyamide filament that takes full advantage of the strengths of both PA 6 and PA66. The combination of these two types of polyamides makes our Nylon very easy to 3D print. Normally Nylon (PA) is very hard to 3D print with. With regular nylon 3D printer filaments, you’ll have a hard time to make it stick to the build plate. With NylonPower you can use lower 3D printing temperatures than you normally would with Nylon. Use this material in most common FFF/FDM 3D printers.

Main material properties of NylonPower PA6/66:

  • Perfect blend of PA6 and PA66
  • High chemical and thermal resistance
  • Less warping than regular Nylon makes it easy to 3D print
  • Excellent layer adhesion creates strong 3D printed parts

How to 3D print Nylon filament best

When 3D printing with Nylon you should do so on a heated build plate. For best adhesion we recommend that you use Magigoo PA. The temperature should be set to 60-80°C.

Nylon PA6/66 a powerful 3D printing filament

Nylon has strong mechanical strength and deforms less. It´s hard to snap of or break. Furthermore, Nylon is also one of the best materials when it comes to impact resistance.

Special material properties of nylon & tips for process it

Nylon is very hydroscopic. This means that it absorbs liquids, this could be a benefit if you want to dye your filament. It also means that it is important to dry your Nylon before use. You can set the oven at 70-80°C and leave it there for 4-8 hours. The longer you leave it, the dryer it will be. That will also reflect on the finished print result, both visual and performance wise.

Additional information

Weight 0,89 kg
Κατασκευαστής

Διάμετρος Νήματος

Βάρος

Υλικό

, ,

Χρώμα

Essential Data:

Material PA 6 and PA 66
Diameter 2.85mm
Tolerance ± 0.05 mm
Heated build platform required Yes, 60 – 70° C
Print Temperature 250 – 265° C
Recommended Print Speed 40 mm/s
Weight Filament 500 grams
Total lenght on spool
Spool Size 200 x 55 mm
Spool Hub Diameter 53 mm
Empty spool weight

Technical data

Property Test method Value
Density ISO 1183 1,00 g/cm3
Melting point ISO 11357 180°C
Tensile Modulus ISO 527 4000 MPa
Tensile Strength ISO 527 95 MPa
Impact strength ISO 179/2-1eU 80 kJ/m2
Shore hardness ISO 2039-1 77 MPa
Heat deflection temp. HDT/A ISO 75 160°C
Thermal expansion coefficient ISO 11359 0,1 10-4/K
Max usage Temp. long term ISO 2578 90-120°C
Max usage Temp. short term ISO 2578D 150°C
Specific volume resistivity IEC 60243 1011 Ωm
Flammability ISO 1210 HB
Linear mould shrinkage ISO 294 0,5