PrimaSelect PLA Chameleon – 1.75mm – 750 g – Pink / Yellow fluor

34,90 με ΦΠΑ

Chameleon is a new filament from PrimaCreator with a unique look. The filament is made up from two strands of filament which results in a print that has dual colors. The effect is stunning as the print seems to “change color” as you turn it and the light reflects in different ways.

Highlights:

  • Made from virgin PLA
  • Changes color when you turn it or depending on light
  • Comes in a variety of different color schemes
  • Prints like regular PLA
  • No hazardous fumes or unpleasant smell
  • Low risk of warping
Προσθήκη στα Αγαπημένα
Προσθήκη στα Αγαπημένα
Estimated delivery between 4-10 days 2022/08/23

Description

Chamelon is a new filament from PrimaCreator with a unique look to it. The filament is made up from two strands of filament which results in a print that has dual colors. The effect is stunning as the print seems to “change color” as you turn it and the light reflects in different ways.
PLA is one of the most common used 3d-print materials in the world, it´s non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it’s easy to get great prints. Filament from Prima Creator comes on a transparent spool which makes it easy to see how much filament there are left on the spool. Polylactic acid (PLA) is a bio-degradable polymer that is produced from lactic acid, which can be fermented from crops such as corn.
PrimaSELECT PLA CHAMELEON adheres to BuildTak, PEI or glass plates which are coated with adhesive spray or PrimaFIX. A heated build platform is not essential. However, if your 3D printer has one, we recommend a setting of 35 – 60 °C for best 3D printing results. Recommended print temperature is 205 – 225°C

Additional information

Weight 1,14 kg
Κατασκευαστής

Διάμετρος Νήματος

Βάρος

Χρώμα

Υλικό

Filament Typ PLA
Diameter 1,75 mm
Tolerance 0,05 mm
Weight 0,75 kg
Lenght 251 m
Printing Parameter
Recomended Printing Temp Min 205 ºC
Recomended Printing Temp Max 225 ºC
Recomended Printbed Temperature Min 35 ºC
Recomended Printbed Temperature Max 60 ºC
General
Specific gravity 1,24 g/cm3   ISO 1183
Temperature
Vicat softening temp 58,2 °C   ISO 306/B50
Tensile
Tensile strength 71 MPa   ISO 527
Elongation
Elongation at yield 3,2 %   ISO 527
Elongation at break 3,6 %   ISO 527
Other
Impact Strength 2,6 KJ/m2   ISO 1791eA