PrimaSelect PLA Glossy – 1.75mm – 750 g – Ancient Gold
€44,90 με ΦΠΑ
For this reason, you should use SELECT PLA Glossy: .
- No harmful fumes
- Easy to print with all printers .
- Good temperature range of 210°C – 230°C.
- Extremely glossy surface
- Made from the purest PLA
- Print amazing creations in beautiful colors.
- Heat resistant up to 75°C
Out of stock
PLA Glossy is a new type of PLA that is much stronger than regular PLA and has a heat resistance up to 75°C. This means that you can use it for mechanical parts, as well as parts that you can use in (for example) a hot car during summer without the risk of the print going soft.
PLA Glossy is a unique filament due to it’s shiny surface. It will produce prints with an extremely shiny/metal finish that really stands out.
PLA Glossy is used the same way as regular PLA but with a slightly higher temperature range.
The print temperature should be between 210 – 230°C (typical is 220°C). The filament should be used with a heated build plate for best results and depending on size of the print you, can use it with a range of 20 – 90°C (typical is 60°C) Use normal print speed 40-60 mm/s.
We recommend that you use PrimaFIX on you build surface for best adhesion and to avoid warping.
|Tolerance||± 0.05 mm|
|Heated build platform required||20-90°C|
|Print Temperature||210 – 230 °C|
|Weight Filament||750 g|
|Spool Size||200 x 55 mm|
|Spool Hub Diameter||53 mm|