Wanhao Duplicator 6 – GR2

839,90 με ΦΠΑ

The Wanhao GR2 is the successor to the very popular Duplicator 6. It´s a sleek and modern printer with benefits such as wifi and app for remote use.


  • Heated build plate
  • Air filter
  • 2K camera
  • Control with app
  • MK10 Extruder
  • Large touch screen with stylus pen (pen included)
  • Can print with temperatures up to 245°C
  • Direct drive with “one cable connection”
  • Pre-leveled build plate
Estimated delivery between 4-10 days 2021/09/28
Προσθήκη στα Αγαπημένα
Προσθήκη στα Αγαπημένα


The Wanhao GR2 is the successor to the very popular D6. It´s a sleek and modern printer with benefits such as wifi and app for remote use.

Heated build plate
The Gr2 is equipped with a 6mm thick aluminum steel plate for best performance. Thanks to the very thick plate the heat distribution is extremely good.
The top layer consists of a special material (black sheet) that helps your prints stick to the surface. After you have successfully finished your print and let the plate cool down, the black sheet makes it very easy to remove.

Monitor your print
Thanks to the built in 2K camera you can always keep an eye on your current print. If something should go wrong, you can use the app to pause or abort the print.

Manage with the app
With the app that you can download from Wanhao* you can monitor, change settings, start/stop/abort a print.
You also have the possibility to start a print from the file library stored on the printer.

MK10 extruder
The well know, and very proven MK10 extruder is a reliable extruder that has been used on many printer models. It has a wide range of different nozzles that you can use, brass (standard), hardened steel, ruby – take your pick.

Dual gears
The MK10 have in this configuration dual drive gears. This makes the filament feed in a very even and steady flow. It also helps you if you sometime would like to try flexible filament.

Sturdy and classical construction
The construction in steel makes the GR2 a very stable platform which is important because it reduces the most common problem that causes vibrations, namely light weight constructions. Vibrations is a 3D Printers worst enemy as the result is bad prints. Luckily the GR2 don´t have that problem.

Powered by Cura™
The Wanhao edition of Cura is delivered with the printer. This software is the most used in the world. Easy to use and produces stunning results. If you would prefer to use SimpliFy3D instead it´s good to know that the GR2 is fully compatible.

*Download the app from Wanhao

Additional information

Weight 18 kg




Construction an Technical Details
Usable Nozzle Typs MK10
Usable Filament Diameter 1,75 mm
Nozzle Temperatur Max 255 ºC
Open Filament System Yes
Extruder Typ direct drive
Printing Speed Max 100 mm/s (depends on material))
Build Area 200 mm x 200 mm x 175 mm
Build Plate Temp Max 100 ºC
Povrch stavebnej dosky adhesive sheet
Build Plate Material Aluminum plate
Build Plate Attachment magnetic
Build Plate Leveling System Pre-calibrated – manual Leveling
Build Chamber During Process open
Extruder Number Of 1
Installation Space / Requirements
Total Weight 13 kg
Max Power Consumption 350 W
Voltage AC: 110 V / 230 V, 1,9 A (50/60 Hz)
DC: 24 V, 4,5 A
Power Loss Fail Safe Yes
Touch Screen Yes
Camera Yes
Memory Internal Yes, 2 Gbyte
SD Card Yes, SD-Card
USB Port Yes
Cloud Control Yes
Layer Height 0,1 – 0,4 mm
Shipping Box 460 mm x 460 mm x 550 mm
Shipping Weight 14,8 kg